Centrifugal Casting Socket Liner Customized Bronze Taper Bushings

The copper sleeve of cone crusher includes eccentric sleeve copper sleeve, cone copper sleeve and horizontal copper sleeve. The copper sleeve plays an important role in the operation of the machine. Crusher cone copper sleeve, also known as bushing, eccentric copper sleeve, cone sleeve, taper copper sleeve, spindle bushing. Crusher straight sleeve, crusher bowl shaped tile sleeve, crusher drive bearing, crusher lower thrust plate and other crusher accessories.

Product description

The main processing difficulties of the taper sleeve: the inner taper hole on the taper sleeve matched with the main shaft is the key part of the combined assembly, and the measurement of taper size and workpiece clamping are the key and difficult points in the processing.

1) The choice of the size control method of the inner cone hole

Because the inner hole size of tapered Bush is too large, special taper plug gauge with large specification is needed. It is difficult to design and manufacture such a large taper plug gauge, and it is inconvenient to measure in the process of processing, with small detection range and inaccurate measurement, which can not truly reflect the taper size of the whole inner taper hole. As a single piece of small batch production, taper plug gauge can not be used universally, and its cost is high.

2) Machining and clamping of inner taper hole

The inner and outer circles of the taper sleeve are all conical surfaces, and the axial dimension is longer. If according to the general processing habits, it is installed in the vertical lathe, at this time, the center of gravity of the workpiece is up, and the stability is poor. Therefore, special clamping tools can be used, i.e. welding process disk and process block, lathe chuck clamping process disk, and the middle process block can be used to compress the workpiece and then process the inner cone. Through this method, the stability and reliability of machining process can be guaranteed.

Replacement of copper sleeve of horizontal shaft

The outer copper sleeve can be taken out by a self-made pulling device, but the inner copper sleeve needs to be taken out by hammering with a central rod device. After taking out, it is necessary to check whether the inner hole size of the axle frame is accurate and reasonable. Similarly, the horizontal shaft copper sleeve needs to be cooled for more than two hours to ensure sufficient cooling.

Production advantage :
1. High anti-wearing copper casting parts
2. Widely used in mining equipment, construction machine and metallurgy and other high loaded large machiner.

3. Strict casting processing control, make the tolerance less than 0.003m
4. Long working life and PRsmooth surface treatment

Product Specification

Xinxiang Haishan Machinery Co., Ltd. specializes in the production and processing of copper parts. Since 2008 has focused on the R & D and production of copper castings and CNC equipment.

The main products are copper bush, copper bush, copper nut, large-scale copper casting, flange copper bush, large-scale shaft sleeve, taper broken copper sleeve, excavator copper sleeve, ball mill copper sleeve, copper wire nut, reducer copper worm gear, crusher copper sleeve, Simmons copper sleeve, Sandvik copper sleeve, mining equipment copper accessories, etc. more than 20 series, hundreds of models, copper alloy products a production unit has Advanced processing and mechanical testing equipment, in the region has a strong technical force and reliable quality..

The company has established a complete and scientific quality management system, and a complete quality inspection system for component testing, mechanical performance testing, etc.

Xinxiang Haishan Machinery Co., Ltd. has a mature R & D team. With 20 years of production experience, it takes customers' needs as the starting point and midpoint of technical R & D to provide customers with the best and most efficient product solutions, and has won a number of national patents.

Our company is good at producing copper parts of crusher, with 7 years of production, casting and processing experience. It is a new manufacturer specializing in the production of customized cone broken copper sets in Henan Province. Its products are exported to Germany, Russia, the United States, Bulgaria, Japan and all over China, the quality and technology of our products are highly praised by customers all over the world.